The Best Pressure Washers for Graffiti Removal and More

  1. Powerplay PressureJet 2000 PSI (Electric – Cold Water) Pressure Washer


This pressure washer is ideal for removing graffiti and other paintings. It can reach water pressure of up to 2000 PSI which would remove graffiti or any other material. The pressure is a result of the washer’s capacity to allow water flow of up to one and a half gallons of water per minute. The washer has an adjustable soap volume which can be altered according to what is being cleaned. The spinning spray has a significant effect when cleaning rough surfaces with a 30-foot hose that can reach anywhere.


  1. Generac 2800 PSI (Gas – Cold Water) Pressure Washer


The Generac engine pressure washer is a powerful gas washer that can be owned by a household. It can shoot gas or cold water at 2800 PSI. The engine is very reliable and the Axial Pump very durable. The spray gun has a nozzle that allows one to work for extended periods of time. The washer has its half gallon detergent tank, so you do not have to haul soap with you. Its 2.4 gallons per minute of water flow is enough to remove graffiti from any wall.


  1. Cam Spray ADE Professional 1450 PSI (Electric-Warm Water) Pressure Washer


The Cam Spray washer can be carried by hand to whatever location the cleaning has to be done. It is portable and quite versatile and is one of the best electric pressure washers for graffiti removal and more. Many people also consider it the best home pressure washer. Its water flow can reach up to two gallons per minute with a pressure of about 1450 PSI. The 25-foot hose increases your working area. The amount of pressure can be adjusted according to the area being cleaned for varied tasks. Warm water is especially useful for driveways and walkways, and the Cam Spray Pressure Washer can handle water up to 180 ̊ F.


  1. Easy-Kleen Professional 4000 PSI (Gas – Hot Water) Pressure Washer


This Easy-Kleen pressure washer has to be one of the most powerful industrial washer models on the market. It can reach up to 4000 PSI and can allow water flow of up to 3.5 gallons per minute. The washer has a General Triplex Plunger Pump that has steel valves and brass manifolds that are very durable. It has a ceramic blanket that seals in heat and makes the washer a prime candidate for use in cold areas. The Easy Kleen washer has burners and a thermostat to adjust the temperature accordingly. It has a 50ft hose and wheels suitable for any terrain.


  1. Cam Spray Professional 1500 PSI Wall Mount (Electric – Warm Water) Pressure Washer


Though it is a mounted pressure washer it has a 50ft hose that makes up for lack of mobility. In addition to having a hose, it has a very powerful spray gun. It has an electric motor that can project warm water at 1500 PSI, enough to remove any dirt. The pressure washer has incredible water flow allowing up to 3 gallons per minute. It has a thermal relief feature and ceramic pistons that protect the pump from overheating so you can work for extended periods.


  1. Karcher 4000 PSI (Gas-Cold Water) Pressure Washer w/ Honda GX Engine


This Karcher gas pressure washer is one of the most powerful pressure washers around producing gas at an incredible 4000PSI. It is appropriate for cleaning services that get hired to graffiti removal and more. It has a German engineered Axial pump with a brass head that assures the owner of longevity. You can adjust the water pressure directly on the hose which saves the user the effort of having to walk back to the washer every time. With 50 feet of rubber hose, you can work in a wide area.


  1. Generac One-Wash 3100 PSI (Gas – Cold Water) Pressure Washer


This Generac pressure washer has a power dial that allows for extensive pressure adjustment of 2000 to 3100 PSI. It has a powerful 212cc engine that is easily accessible and reliable. It’s 11’ wheels can move on any terrain and allow for safe transportation of the washer. A household can own it and use it to clean the pavements, the driveway or the car. The machine comes with three spray tips and allows up to 2.8 gallons per minute water flow.


For more of the best electric pressure washer ratings and reviews on other pressure washer types, keep checking back on our site, Veltreco. We welcome your questions and comments, by the way.

How to Remove Graffiti

Graffiti removers should have these items with them:


  1. Solvent in a spray can


  1. new or clean painters rag made of cotton


  1. strong trash bags


  1. cheaper brushes, rollers, and containers for paint


  1. various cans of paint to match colors used in the ara.


  1. a paint scraper


  1. goggles / safety glasses


  1. dust mask


  1. water in a spray bottle and kitchen cleaner


Solvents and cleaning products


There are a variety of solvents and cleaning products that are useful in removing graffiti. Knowing what each is capable of doing and the best ways to safely use them is important information to know, so learn it. Solvents in particular can be highly effective for cleaning away graffiti yet can be dangerous if not used properly. Solvents should be kept away from eyes and skin, dust masks or respirators are also worth wearing. If possible do not use in confined spaces.


Read up on the things used for cleaning to know what to do if there is an accident.


Wear safety glasses

As the cleaning agents and solvents contain often hazardous material it is best to wear safety glasses when using cleaners. Do not risk eye safety at all.


Cleaning up smooth surfaces


First test a small out of sight part of the surface with your cleaning product. The newer signs should be easier to wipe clean with soap and water. Only use solvents if soap and water does not remove it all.


Removal from rough surfaces


Often the graffiti on rough surfaces causes damage that cannot be removed. Cleaning such surfaces may cause more harm than good. In the end you may have to repaint the entire wall.


Use a wire brush


Sometimes a wire brush is ideal for removing graffiti, you just need to apply elbow grease. Every graffiti remover should have an inexpensive wire brush among their essential tools.


Graffiti removal tips


  1. If only graffiti was easy to remove as it is to spray on surfaces in the first place. When it comes down to rough brick surfaces graffiti removal can be virtually impossible unless you are fortunate enough to be removing brand new graffiti. Newer graffiti is far easier to remove than older paint. Your main choice when faced with older graffiti involves repainting the entire surface.


  1. For metallic surfaces including mailboxes, and roll up steel doors a liquid based solvent is your best option for effective graffiti removal. Liquid remover is known as Solvagram. You should only need to use a small bit of Solvagram and some steel wool.


  1. When it comes to cleaning up a brick surface the most effective option is to chose a biodegradable emulsifier to clean the bricks with. Only an emulsifier will clear graffiti from brick walls, especially red brick ones. It is better than using wire brushes and liquid solvents, causing minimal damage to the wall.


  1. For walls and fences in areas that regularly get graffitied it makes a lot of sense to have them all painted the same color. It is best if all the shops and businesses give prior permission to have everything repainted immediately.

Tips for Preventing Graffiti

Graffiti can take a great deal of effort to remove, so it is better in many respects to limit the amount of it that is produced in the first place. The Urban Parks Institute has sought ways to prevent or limit the amount of graffiti that is sprayed or painted in city parks. Various approaches need to be taken to counter the spread of graffiti. Park managers can attempt direct or indirect approaches to limit the opportunities of graffitists to paint all over park facilities, furniture, and buildings. Using direct approaches involves managers regulating the behavior of all park visitors and users. On the other hand indirect approaches rely on design strategies that put people off applying graffiti to surfaces in parks.


In recent years the indirect approach tends to have been used more frequently. That has tended to be the case as park managers have had their budgets reduced. With the hiring of extra staff to directly stop graffitists not practical designing parks to deter graffiti has become the main method of limiting it.


Designing Parks to restrict opportunity


The design of parks is really important in restricting the opportunity for people to put graffiti on any surface they can paint without been seen or caught. Managers should look around their parks to see if they can spot any weak spots. For instance places that are closer to movable furniture are prone to graffitists climbing up and graffiting things. If grafetting can be seen above 6 feet then the furniture needs to be moved or bolted down. Such a simple step can cut graffiti without too much effort.


Reduce cover and increase lighting


Putting things out of reach and keeping things lit up will deter most from trying. After all graffitists want people to see what they have done but not see them doing it. Lights that night as bright as day can make graffitists go somewhere else especially if the lights are hard to reach and vandal resistant.


Plants can be a low cost means of stopping graffitists getting into areas that managers want to block off. Plants that grow quickly, grow thick and have thorns are ideal. These can be effective barriers, but be careful to avoid the local youths that the plants are there to specifically stop them, as they make take their revenge.


Managers could using coating materials, although it does not prevent graffiti it makes things much easier to be cleaned up.


Other tactics for countering graffiti


Waterproof sheets of plastic – these are great because they can be easily peeled off if anyone has put graffiti on the surface. It is quicker and more cost effective way of keeping things clear.


Mural art – research strong indicates that multicolored mural art deters graffitists, quite possibly because bright colours would make it harder to see graffiti tags.


Removal graffiti boards – sometimes the best option is to have cheap and removable boards that can be graffitied and then removed to be replaced by the next one.